How to Apply GP Glass Treatment

Step by Step Instructions

Product Application:

Download Full Instructions and Product Information

Prep:
For the best possible results and product effectiveness, start by thoroughly cleaning the glass to remove any dirt, bugs, chemicals, or other contaminants using a product like our Glass & Chrome Polish, and then prep the glass surface for treatment by cleaning with an alcohol-based, ammonia-free Glass Cleaner.

Application:

*Apply in temperatures between 50°F and 90°F 

1) In a well-ventilated area, wipe Chemical A towelette on dry, clean glass. Spread evenly across the glass using a cross-hatch pattern (side-to-side, top-to-bottom), making sure the entire surface is covered. Allow the chemical to set for one full minute

2) Repeat step 1 using Chemical B towelette directly on top of Chemical A. Allow chemical to set for one full minute

3) Wipe off the haze using a damp towel and polish the surface with a clean microfiber cloth

4) Remove any excess residual chemical by cleaning the surface with alcohol-based glass cleaner and wiping the surface dry with a paper towel

Precautions
Wash hands and face thoroughly after handling
Wear protective gloves and eye/face protection
Avoid breathing vapors
Use only outdoors or in a well-ventilated area
Keep away from heat, sparks, and open flame